Boca Bearings
Boca Bearing Fishing Reel Bearings Review

Was very satisfied with the service and also found the bearings to be excellent. Just what i wanted. Thanks

RC Engine Bearings Customer Review

You guy’s provide an easy way to buy quality RC engine bearings for our engines at an affordable price! Thank you.

I have always received my bearing orders before I expected too ( usually 2-3 days ordering ).   I usually get the econo bearing set with the rubber seals for 1/10 scale slash 4x4.  These bearing seem to hold up  better than any I have tried and for a much better price.   Thanks Boca Bearing for your quality bearings and service !!!!

I have always received my bearing orders before I expected too ( usually 2-3 days ordering ).   I usually get the econo bearing set with the rubber seals for 1/10 scale slash 4x4.  These bearing seem to hold up  better than any I have tried and for a much better price.   Thanks Boca Bearing for your quality bearings and service !!!!

I have installed the bearings from my order on some Abu Garcia and Daiwa baitcast reels.  The bearings added between 3 and 5 seconds of additional free-spool spin time on every reel (depending on the model).  The Daiwa Steez had the greatest increase in spin time.  To my surprise, the bearings also increased the sensitivity of the rod and reel.  I’m assuming this is due to the lack of grease in the bearings, which created a dampening effect in the stock bearings.  The reels casted smoother and with less effort.  I am very pleased.

Thanks,
Mark

I have installed the bearings from my order on some Abu Garcia and Daiwa baitcast reels.  The bearings added between 3 and 5 seconds of additional free-spool spin time on every reel (depending on the model).  The Daiwa Steez had the greatest increase in spin time.  To my surprise, the bearings also increased the sensitivity of the rod and reel.  I’m assuming this is due to the lack of grease in the bearings, which created a dampening effect in the stock bearings.  The reels casted smoother and with less effort.  I am very pleased.

Thanks,

Mark

Great packing, super fast shipping and all of the bearings fit perfect no problems what so ever! Thanks again for great awesome bearings!!

Great packing, super fast shipping and all of the bearings fit perfect no problems what so ever! Thanks again for great awesome bearings!!

We purchased bearings recently —one was a web order and the other a phone order. My questions were answered timely and the orders were received within a few days. I could not be happier with your service and the quality of the bearings.
Thanks,
John

We purchased bearings recently —one was a web order and the other a phone order. My questions were answered timely and the orders were received within a few days. I could not be happier with your service and the quality of the bearings.

Thanks,

John

Good experience!  Jeff Brooks was a big help making sure I ordered what I needed to help revive a beat up fishing reel.  Installed the bearings and now that old spool is spinning good as new.  Got another beat up reel sitting on the shelf, so I may be making another order soon so maybe it can get some new life as well!Thanks,-Lance-

Good experience!  Jeff Brooks was a big help making sure I ordered what I needed to help revive a beat up fishing reel.  Installed the bearings and now that old spool is spinning good as new.  Got another beat up reel sitting on the shelf, so I may be making another order soon so maybe it can get some new life as well!
Thanks,
-Lance-

"Well Boca Bearing has come through again. Now My KV1000HXD baitcaster cast like new. I ordered a bearing kit for KVD1000CXD and it works great in the KV1000HXD. Why buy another reel , when all I have to do is replace the bearing with BOCA Bearings. Thanks again for another great product. I have many more reels that need bearing replace. Boca Bearings are the Best
-Charles”

"Well Boca Bearing has come through again. Now My KV1000HXD baitcaster cast like new. I ordered a bearing kit for KVD1000CXD and it works great in the KV1000HXD. Why buy another reel , when all I have to do is replace the bearing with BOCA Bearings. Thanks again for another great product. I have many more reels that need bearing replace. Boca Bearings are the Best

-Charles”

Just got finished test casting my brand new Shimano Chronarch 50E!!!   I have been supertuning all my new reels.  The performance is EXCEPTIONAL!!  I experimented with the BOCA ORANGE SEAL bearings with all the shields removed for faster performance.  I cant tell you how far this newest reel can cast on a single swing because I CASTED ALL THE LINE OFF OF IT!!!  The shimano chronarch 50e holds approx. 105yds of 10pound test mono and I had to slow the reel down so I wouldnt lose my casting plug :-).   I replaced all the stock bearings in the reel with orange seals as an experiment to see if it made that much of an improvement and so far so good.  Think I will order more orange seals for my other reels.  Thank you BOCA BEARINGS!!!!
-Bill

Just got finished test casting my brand new Shimano Chronarch 50E!!!   I have been supertuning all my new reels.  The performance is EXCEPTIONAL!!  I experimented with the BOCA ORANGE SEAL bearings with all the shields removed for faster performance.  I cant tell you how far this newest reel can cast on a single swing because I CASTED ALL THE LINE OFF OF IT!!!  The shimano chronarch 50e holds approx. 105yds of 10pound test mono and I had to slow the reel down so I wouldnt lose my casting plug :-).   I replaced all the stock bearings in the reel with orange seals as an experiment to see if it made that much of an improvement and so far so good.  Think I will order more orange seals for my other reels.  Thank you BOCA BEARINGS!!!!

-Bill

I thought it may be high time for me to update you on ceramic hybrid bearings I replaced in my T-Tex 800 24cc gasser heli.
Right. Here goes:
You may recall that we experienced a torque tube drive shaft bearing seizure resulting in the shearing off of the shaft which necessitated an autorotation (after a fashion i.e with NO tail rotor operating!!)\Fortunately only damaged to damage the main rotor blade tips (still cost over $200!) This happened after only 30 flights which equated to approx; 15 hrs (each flight 30-40 mins)
Anyway. We have now clocked up 105 flights, meaning Rex has now had over 100% improvement on the factory Align bearings life span!!!

I thought it may be high time for me to update you on ceramic hybrid bearings I replaced in my T-Tex 800 24cc gasser heli.

Right. Here goes:

You may recall that we experienced a torque tube drive shaft bearing seizure resulting in the shearing off of the shaft which necessitated an autorotation (after a fashion i.e with NO tail rotor operating!!)\Fortunately only damaged to damage the main rotor blade tips (still cost over $200!) This happened after only 30 flights which equated to approx; 15 hrs (each flight 30-40 mins)

Anyway. We have now clocked up 105 flights, meaning Rex has now had over 100% improvement on the factory Align bearings life span!!!